‰  NOW 13 WPM  ‰
DRILLED AND TAPPED OPPOSITE THE SETSCREW TO ACCEPT 1/4 20 NYLON SCREWS,
WHICH ARE USED AS THE 12 METER ELEMENT CORNER ANCHORS.  THE NYLON SCREWS
AND COLLARS PROVIDE A WEATHERPROOF METHOD OF SECURING THE ELEMENTS WITHOUT
ADDING METAL THAT MIGHT AFFECT RESONANCE.  THE COLLARS ALSO PROVIDE AN EASY
WAY TO ADJUST THE ELEMENTS.  A PARTIAL VIEW OF THE INNER ELEMENT 12 METER
COLLARS CAN BE SEEN IN FIGURE 4.  THE FEED LINE/BALANCE SPREADERS TWO TYPE
C, 1/2 INCH PVC CONDUIT BODIES ARE MOUNTED IN THE FEED LINE SPREADER AND
ƒ  QST DE W1AW  ‰
PROVIDE ACCESS TO THE FEED LINE, TRANSMISSION LINE, AND DRIVEN ELEMENT
TERMINAL POSTS.  THE CONDUIT BODIES SLIDE OVER THE 3/4 INCH TUBING AND ARE
SECURED WITH STAINLESS STEEL SETSCREWS.  AFTER YOU HAVE DETERMINED THE
LOCATION OF EACH CONDUIT BODY, CUT SLOTS INSIDE THE CONDUIT BODIES ON THE
‰  FROM PAGE 100  ‰
/342 JH3HTD/340 JH4FEB/348 JH4IFF/346 JH4RLY/343 JH4UYB/342 JH5FTY/341 JH6
CDI/348 JH6JMN/341 JH7BDS/345 JH7FMJ/347 JH8DEH/338 JH8MXH/343 JI1FXS/339
‰  END OF 13 WPM TEXT  ‰  QST DE W1AW  ƒ